Fulaim X5M Wireless Microphone

The Fulaim X5M Wireless Microphone is a two-mic kit that is a perfect starter for anyone wanting to record audio directly to a camera or conduct interviews. The set is affordable at less than £100 and comes with a decent variety of swappable connectors, further adding to its appeal.

What’s more, unlike some other cheap solutions, the Fulaim X5M comes with a full charging case, two transmitter mics, a receiver, and the choice of USB Type-C, Lightning, or 3.5mm connectors to support a range of devices.

Its big feature compared with others in this price range is the fact that it has an excellent display that packs in all the information you need about the mics and the audio you’re recording and settings. The other interesting addition to what you would usually expect from an entry-level unit is the fact that you can plug an external Lavalier mic, enabling you to use these mics discreetly for a more professional finish.

This makes the set a neat solution for anyone looking to boost the quality of their audio without spending a fortune.

The Fulaim X5M’s design is familiar, if slightly different, with a blend of design and features that I have seen on other entry-level wireless mic systems. The casing’s colour profile is similar to that of Hollyland, but the overall quality of the case feels a little cheaper. However, it is more than adequate to keep the mics and receivers safe and protected during transport. I would, however, be tempted to pop this into a small protective sleeve case just to ensure its longevity.

Opening up the case, you see all the component parts neatly laid out within. The receiver is in the middle, with the two transmitter mics on either side. The various connectors are laid out in the case above and below the receiver.

As the case is opened, four lights (or fewer if the case isn’t fully charged) illuminate to highlight its power status. Inside, the mic components all flash to life, with a blue light on each indicating that they have connected and are ready to use as soon as they’re removed from the case.

The two transmitter mics are straightforward and can be clipped or magnetised into position. It’s a common design and has proven to work well with other devices. An interesting addition to these small transmitters is that they have a few more features than you would usually expect at this price point. These additions include a 3.5mm socket for a Lavalier mic, the ability to attach a wind jammer over the mic (an optional extra), and a second button to activate noise reduction.

Looking at the receiver, the X5M surprises again with a small LCD screen that shows the status of all components, along with signal strength and input volume. Taking the receiver out, it’s far smaller than you would first expect at 47x29x14mm and weighing in at 21g. Before the receiver can be mounted, you need to install one of the three connectors. In this test, I utilised the USB Type-C to connect directly to the iPhone 15 Pro and the 3.5mm jack to connect to the Sony A7 IV. As a set, it’s all very neat and extremely comprehensive.

The Fulaim X5M microphone system includes several standout features that make it a solid choice for those looking to upgrade their audio setup on a budget. One of the most useful is the one-click noise cancelling feature, which quickly reduces background noise.

Another practical feature is the magnetic attachment system. This allows for a quick and easy setup, whether you’re clipping the mic to clothing or attaching it to other surfaces.

The Fulaim X5M also offers an impressive wireless transmission range of 200m/656ft. This is useful for both indoor and outdoor shoots, giving you plenty of flexibility without worrying about losing signal over longer distances.

The system delivers uncompressed 48Khz 16bit audio, ensuring a clear and crisp sound quality. This uncompressed audio output is a major benefit for the price, giving a noticeable improvement over built-in camera microphones or other low-cost solutions.

Battery life is another strength, with the system offering up to 18 hours of use and running for 9 hours in high-fidelity mode. The charging case can fully recharge the entire kit twice with 6 hours of use per charge, making it ideal for longer recording sessions or travel where charging options may be limited.

Finally, the Fulaim X5M offers Stereo, Mono, and Secure Audio Track modes, providing flexibility for different recording situations.

Considering the Fulaim X5M kit retails for under £100/$100, it offers an array of features that make it an attractive option for creators. Among its highlights is the uncompressed audio capture, providing plenty of room for post-production enhancement. This level of audio quality is impressive at this price point, ensuring your recordings have greater depth and clarity than built-in mic systems typically provide. The small LCD on the receiver is another standout, letting you monitor your audio levels and settings with ease. Coupled with the three recording options—mono, stereo, and safety track—the system gives you ample flexibility, especially when paired with features like noise reduction and audio input for a discrete Lavalier mic.

On paper, these features put the X5M in direct competition with more expensive systems like the DJI Mic 2, which costs nearly three times as much. While other brands like Hollyland and Godox offer comparable wireless mic kits in this price bracket, the Fulaim X5M’s ability to connect a lavalier mic gives it an edge for those seeking a more discreet, professional setup.

Setting up the system is incredibly simple. The charging case ensures everything stays powered up, and the four LED lights on the front provide a clear indication of the remaining charge. As soon as you remove the transmitters from the case, they automatically pair with the receiver. From there, it’s just a matter of clipping the mics onto your subjects and plugging the receiver into your camera or phone. The swappable connector on the receiver is a time-saver, allowing you to switch between devices in seconds. In this test, I used the Sony A7 IV, connecting the receiver via the 3.5mm audio socket.

Once installed, the small receiver display shows the audio pickup levels for both transmitters, along with the mode and input volume. Adjusting the input volume is simple, thanks to the dedicated dB button, which offers five levels of adjustment. Holding the button for a few seconds toggles between the recording modes. In mono, both mics record to the left and right channels; in stereo, each mic records separately on its track. The safety track (or Secure Audio Track) records in mono but with one channel set 6dB lower than the other to prevent clipping in louder environments.

Across all modes, the performance is impressive, and the noise reduction does an excellent job of cleaning up the sound without distorting it. Although the Godox Magic XT1 offers similar features at a slightly lower price, the Fulaim X5M’s lavalier mic support sets it apart. The ability to easily switch noise reduction on and off, combined with its user-friendly interface, makes it a great option for both beginners and more seasoned creators.

Of course, features are one thing, but audio quality is what ultimately matters. Here, the X5M performs well. While the sound is a touch tinny compared to pricier options like the DJI Mic 2 or Rode Wireless Go, it’s still more than good enough for most recording situations, particularly given the price point. Overall, the Fulaim X5M delivers impressive value and performance for a budget wireless mic system.

The Fulaim X5M faces strong competition from brands like Godox, Hollyland, and SmallRig, all of which offer excellent budget mic kits. However, the X5M holds its own, particularly thanks to its lavalier input option, which gives it an edge over rivals like the Godox Magic XT1 and Hollyland C1. This feature makes it more versatile for those seeking a discreet mic setup or wanting more control over their audio capture.

In terms of build quality, the X5M is decent but could be more exceptional. The Godox XT1 stands out for its unusually robust construction for a budget product. Still, when compared to the offerings from Hollyland, SmallRig, and other Godox models, the X5M is on a similar level. While the plastic casing feels slightly cheaper, it’s still adequate for most users. This makes the Fulaim X5M a solid choice for beginners and enthusiasts, though it may not be the best option for professionals who demand more rugged gear.

One area where the X5M truly shines is usability. Its ease of setup, swappable connectors, and automatic pairing make it a breeze to operate. But ultimately, sound quality is what matters most, and here, the X5M delivers. The audio quality is good and holds up well against the competition. It adds depth to your recordings that onboard mics just can’t match, and the uncompressed audio format gives you plenty of flexibility in post-production.

While other mics in this price range may offer slightly better build quality, the X5M stands out for its ability to plug in external lavalier mics. This makes it a fantastic choice for interviews or first-time film productions. As long as you handle it with care, the Fulaim X5M should serve you well for years, providing reliable audio for a range of projects.