The Dolly360, a new radio-controlled dolly for 360-degree cameras, promises to offer both vertical and horizontal stabilisation.
Aimed at users of action and VR cameras, the Dolly360 is designed to navigate narrow spaces and promises to go where your drone can’t, while still being under your control.
The Dolly360 boasts a special gimbal for spherical stabilisation, along with a telescopic oil shock absorber for vertical stabilisation.
The Dolly360 can also withstand a payload of 1kg, with an additional 5kg on the gimbal.
The Dolly360 is priced at 500,000 yen, which is about $4,430. There’s no word on whether this product will reach a wider market than Japan. For now the Dolly360 seems like more of a novelty item, though a very cool one at that!
LENGTH (Approx.) 550mm
WIDTH (Approx.) 420mm
HEIGHT (Approx.) 700mm
WHEELBASE (Approx.) 360mm
WEIGHT (Approx.) 6.0KG
*Excl. Battery, Weight, Camera, etc.
*Additional weight load of total 5KG (1KG x 5pcs)
TIRE SIZE (Approx.) 155mm(D) x 70.5mm(W)
GEAR RATIO 73.94:1
MOTOR Team Orion Neon 8BL KV2100 Brushless Motor
ESC Team Orion Vortex R8 130A
TRANSMITTER Kyosho KT-231P 2.4GHz
RECEIVER Kyosho KR-331
STEERING SERVO Kyosho KS-5031-09MW
BATTERY NiMH 7.2V 3700MAH
MAX SPEED (Approx.) 6km/h
RUN TIME (Approx.) 25min @NiMH 3700MAH
*Varies depending on conditions
DRIVE TRAIN 4WD with Front One Way Unit
*4WD when forwarding, 2WD when reversing
OTHER Front and Rear Differential Gears
Fully balanced on all rotating axles (Ball Bearing x 24pcs)
CAMERA STABILIZING UNIT (Horizontal Direction) Gimbal system (Oil shock absorber x 4pcs)
CAMERA STABILIZING UNIT (Vertical Direction) Telescopic system (Oil shock absorber x 1pc)
CAMERA MOUNT SCREW 1/4-20UNC x 4.5mm
Camera Weight Load (Max) 1KG (with 5KG additional weight on Gimbal)
*When positioned at 1.6m height from ground
*Varies depending on weight of mono pod
FPV CAMERA MOUNT SCREW 1/4-20UNC x 4.5mm
OTHER Fully balanced on Gimbal section (Ball Bearing x 6pcs)